EPOXY GROUT is a three-part system, comprising of PART A, PART B and
PART C. For ease of application and the ability to fill tile / stone joints the grout is best mixed to a smooth, creamy consistency.
EPOXY GROUT is Hygienic, hard-wearing, impervious, epoxide resin-based grout with a high degree of resistance to chemical attack, abrasion and impact. The cured grout does not transfer taints to foodstuffs, does not permit the entry of bacteria or dirt and is easily maintained in a sterile condition.
Hygienic and chemical resistant
Stain and bacterial resistant
High abrasion resistant
Ideal for contact with aqueous food products
Conforms to the overall migration standards laid down in 21 CFR 175-300(April 2011) of US- FDA for intended use for contact with aqueous food products.
Exceeds EN 13888 requirements.
EPOXY GROUT @ 27± 1oC
Joint Width 2 - 20 mm
Pot Life 45 minutes
Setting Time 48 hours
Resistance Prolonged -30oC to 50oC
Intermittent Up to to 70oC
Water Absorption Nil (1)
Determined by the Campden Food &
Drink Research Association, UK.
Specific Gravity 1.75
Shore D Hardness >70
Pack size & Coverage
5 kg. Consumption depend on joint width, size of tiles and good workmanship Refer to the theoretical coverage calculation below:
Theoretical coverage calculation:
(Tile length + Tile breadth) x Tile thickness x Joint width x Specific gravity*
(Tile length + Joint width) x (Tile breadth + Joint width)
NOTE: * Specific gravity= 1.75 All the dimensions are in mm
Use ARDEX ENDURA spacers for uniform joint width.
Storage and Shelf Life
EPOXY GROUT has a shelf life of 12 months when stored in normal dry conditions.