Weber Color Fine is a cementitious tile grout used for internal application. It is suitable for grouting ceramic tiles, vitrified tiles, marbles, granites, mosaics & natural stone in walls & floors.
Weber color fine is recommended for use on tile joints of l-6 mm width.
Ensure 24 hours time interval for grouting after tile fixing.
Keep the grouted area free from dust particles for minimum 24 hours.
For best results, use spacers and keep a 2mm joints between the tiles.
If the tiles are highly porous, do a sample test to check for possible staining. To avoid this problem mask the tiles before grouting
Apply weber color shield on grouted joints for added protection against accumulation of dirt, dust & stain
density of powder
1. 1 to 1. 20
upto 1 hour
48 hours after laying
suitable for joint widths
1 to 6 mm
+ s°c - 3s°c
10 kg / bltr.
Polymer Modified Cementitious Tile Joint Filler
ROFF RAINBOW TILE MATE is a polymer based cementitous tile joint filler used for in filling joints of all kind of tiles. It effectively fills the gaps and levels it self to give hard wearing, non-dusting, tile joints. ROFF RAINBOW TILE MATE does not allow moisture / water to seep into the back of the tile and cause its dislocation. It firmly holds the tiles together to give a long life to the floor tiles. ROFF RAINBOW TILE MATE is available in 16 pleasing colours to match the colour of tile (ask for shade card). ROFF RAINBOW TILE MATE is recommended for filling joints upto 3 mm width.
For More Specification Please Click Our PDF File :
A high quality fine, polymer-modified, water - resistant, cement - based powder grout designed for grouting glazed wall tiles, mosaics, vitrified & fully vitrified tiles, floor tiles, industrial floor tiles, etc (where chemical resistance, hygienic and sterile is important use ARDEX ENDURA EPOXY GROUT).
Polymer modified grout
Good compressive strength
Available in range of colours
GROUT @ 27± 1oC
Joint Width 2 - 6 mm
Pot Life 30 minutes
Curing Time 24 hours
Resistance -30oC to 150oC
Mixing Ratio Water : Grout
1 : 3
Compressive Strength 24 hours min. 4.00 kN
48 hours min. 8.00 kN
Consumption depend on joint width, size of tiles and good workmanship. Refer to the theoretical coverage calculation below:
Theoretical coverage calculation:
(Tile length + Tile breadth) x Tile thickness x Joint width x Wet density*
(Tile length + Joint width) x (Tile breadth + Joint width)
NOTE: * Wet density = 1.80 All the dimensions are in mm
Use ARDEX ENDURA spacers for uniform joint width.
Storage and Shelf Life
CEMENT POLYMER GROUT has a shelf life of 12 months when stored in normal dry conditions.
White, synthetic polymer emulsion for use with cement-based Grouts. Suitable for use in interior and exterior locations in both dry and wet service conditions.
ADMIX GT1 is a polymer additive for joint fillers eg. ARDEX ENDURA Cement Polymer Grout ,Super Grout & Wide Joint Grout..
Polymer additive for Cement Polymer Grout,Super Grout & Wide Joint Grout.
Improves the flexibility for Cement Polymer Grout,Super Grout & Wide Joint Grout.
Improves the strength
Improves water resistance
Increase the abrasion resistance of Cement Polymer Grout,Super Grout & Wide Joint Grout.
The addition of ADMIX GT1 to cement-based grouts improves their physical properties and characteristics.
Increased mechanical strength
Providing greater adhesion to tile edges e.g. glass mosaics and fully vitrified tiles.
Providing greater abrasion resistance. Particularly important in heavily trafficked areas such as shopping malls.
Increased flexural strength and flexibility.
Enabling grouts to be used where limited movement / vibration is anticipated e.g. plaster board and timber floors.
Reduced water permeability
Providing greater protection to water sensitive backgrounds and minimising the risk of efflorescence.
1litre and 100ml.
Storage and Shelf Life
ADMIX GT1 has a shelf life of 12 months when stored in normal dry conditions.